Swiftech MCX V PRO Bedienungsanleitung PDF herunterladen

Rouchon Industries, Inc., dbA Swiftech – 3700 industry Avenue, Suite 104, Lakewood CA 90712 – Toll free (US) 888-857-9438–

Fax 562-595-8769 -E Mail: helpswiftech.com – URL: http://www.swiftech.com - Information subject to change without notice

Page - 1 -

I Before you begin :

• Make sure to identify your motherboard properly, as the mounting systems are fundamentally different:

400/533Mhz FSB (Chapter II), or 800Mhz FSB (chapter III)

• Remove the existing cooling solution from your motherboard.

• Clean the CPU with a xylene based cleaner.

• Lightly coat the CPU with the provided Céramique™ thermal compound. Detailed instructions can be found at

http://www.arcticsilver.com/ceramique_instructions.htm

• Dual processor side-by-side installation

Figure 1

In dual processor “side-by-side” installations make sure to orient the “flat” sides of the heatsinks towards each other.

On one side of the heatsink, the outmost row of pins has been removed. This provides clearance for installation of the

2 MCX-VPro heatsinks in side-by-side, dual processor configurations.

• Fan compatibility and installation (fan is not provided)

Use the provided snap-rivets to secure the fan to the bracket thru the lower lip of the fan as shown in the

schematic page 1. Fans that do not feature a lip cannot be installed with the provided snap-rivets, and will require

a screw and nut to be secured to the brackets.

Recommended fans

Suggested fan airflow rating for normal use (non-overclocked processor), and operating conditions: please visit our

web site www.swiftech.com for a list of recommended fans depending on the applications.

II Installation with 400/533 MHz FSB motherboards

Introduction:

• The MCX603-V heatsink can either use Intel’s validated retention clips, which are provided with your

motherboard (sub-chapter 1) or it can be installed with Swiftech proprietary mounting system (sub-chapter 2).

• When installed with the Intel clips, removal of the motherboard is not necessary. Please consult your

motherboard user’s manual for installation of the retention frame and clip.

• For installation with 800Mhz FSB motherboards, please go to chapter III.

1 2 3 4

Seite 2

Seite 4

Weitere Dokumente für Computerzubehör Swiftech MCX V PRO

Keine Kommentare